Features
This machine is a sanding machine mainly used for flat primer sanding of solid wood and wood veneer panels. It featuresuniform sanding removal and less prone to sand-through at edges, and can completely replace manual hand sanding. greatlyimproving sanding efficiency and quality.
Equipped with a servo reciprocating unit,it accurately controls the sanding removal at workpiece edges to ensure no sand-throughduring grinding.
The pressure plate adopts a patented floating structure wth servo control and automatic width recognition. It not only achieves theflexible sanding effect similar to manual work, but also ensures stable sanding fatness through precise pressure control. It uses atriangular sanding belt, which has a longer service life and provides more stable pressure during pressing, though at a higher cost.The whole machine is controlled by a Delta touch screen, making operation simple and maintenance convenient.With a dual sanding belt combination, the grit sizes can be flexibly matched to achieve a fine finishing effect at any time.
Technical Parameters |
| Model | CN2500-S2 |
| Processing Width | 30-2500mm |
| Minimum Processing Length | 300mm |
| Processing Height | 10-100mm |
| Conveying Speed | 1-7m/min |
| Conveyor Motor Power | 2.2kw |
| Belt Drive Power | 2.2kw × 2 |
| Servo Motor Power | 2.0kw × 2 |
| Lifting Motor Power | 1.1kw |
| Dust Suction Diameter | Φ150 × 4 |
| Total Power | 11.7kw |
| Power Supply Requirements | 380V/50Hz |
| Overall dimensions | 3950×2250×2050mm |
